Custom Rubber Inflatable Valves Beach Ball Style for inflatable latex in two sizes -  Exclusive from “Candy Coated Latex” Brand
 
These rubber beach ball style valves are for latex inflatables and have been exclusively designed for latex by the inflatable brand “Candy Coated Latex” in the USA and are now sold here in the UK. 
 
Perfect for : 
Inflatable latex hoods
Inflatable latex tails 
Inflatable latex costumes 
Inflatable latex straight jackets 
Inflatable latex plushies
And more! 
 
Instead of using a bike valve, you can install these beach ball rubber valves into your latex inflatables. They can even be pushed inside of the latex inflatables so it is flush flat! 
 
Available in two sizes and colour ways 
 
*Medium black latex valve 1” wide base, valve mouth 1/2” 
*Medium Cream latex valve 1” wide base, valve mouth 1/2” 
*Large black valve 2” wide base, valve mouth 1” 
 
To install in latex:
1) Sand around the base of valve to roughen the surface
2) Cut a hole in latex sheet slightly smaller than valve mouth
3) Prepare latex sheet surface underside and valve base 
4) Apply rubber cement glue to Latex sheet underside and valve e.g Bostick 
5) Stick valve to latex underside, pushing through hole. 
6) Cut a circle of latex sheet bigger than valve base with a hole middle 
7) Glue latex sheet circle with hole to underside of latex to seal valve
8) Roller with seam press for tight seal. 
9) Inflate with pump or mouth, close plug, push valve inside inflatable.
10) Completed latex valve installed 
 
Sent via Royal Mail tracked and signed for to the UK.